dmesg - INTEL SSDSA2CT04 - AMD FX-6300 Six-Core
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 4.4.3 (root@fx6300) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Sat Feb 27 21:46:43 CET 2016
tseg: 00bf800000
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd82ffff] usable
BIOS-e820: [mem 0x00000000bd830000-0x00000000bdb2ffff] reserved
BIOS-e820: [mem 0x00000000bdb30000-0x00000000bde7afff] ACPI NVS
BIOS-e820: [mem 0x00000000bde7b000-0x00000000bea40fff] reserved
BIOS-e820: [mem 0x00000000bea41000-0x00000000bea41fff] usable
BIOS-e820: [mem 0x00000000bea42000-0x00000000bec47fff] ACPI NVS
BIOS-e820: [mem 0x00000000bec48000-0x00000000bf06dfff] usable
BIOS-e820: [mem 0x00000000bf06e000-0x00000000bf7eefff] reserved
BIOS-e820: [mem 0x00000000bf7ef000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: MSI MS-7693/970A-G43 (MS-7693), BIOS V10.4 04/10/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000043f000000 aka 17392M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd850-0x000fd85f] mapped at [ffff8800000fd850]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01814000, 0x01814fff] PGTABLE
BRK [0x01815000, 0x01815fff] PGTABLE
BRK [0x01816000, 0x01816fff] PGTABLE
BRK [0x01817000, 0x01817fff] PGTABLE
BRK [0x01818000, 0x01818fff] PGTABLE
BRK [0x01819000, 0x01819fff] PGTABLE
RAMDISK: [mem 0x374fa000-0x37a74fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BDE6B070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BDE714E8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
ACPI: DSDT 0x00000000BDE6B160 006384 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BDE74080 000040
ACPI: APIC 0x00000000BDE715F8 00008E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BDE71688 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BDE716D0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BDE71710 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000BDE71748 0009F6 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: IVRS 0x00000000BDE72140 0000C8 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
NODE_DATA(0) allocated [mem 0x43eff6000-0x43eff9fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bd82ffff]
node 0: [mem 0x00000000bea41000-0x00000000bea41fff]
node 0: [mem 0x00000000bec48000-0x00000000bf06dfff]
node 0: [mem 0x00000000bf7ef000-0x00000000bf7fffff]
node 0: [mem 0x0000000100001000-0x000000043effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
On node 0 totalpages: 4180996
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12082 pages used for memmap
DMA32 zone: 773224 pages, LIFO batch:31
Normal zone: 53184 pages used for memmap
Normal zone: 3403775 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd830000-0xbdb2ffff]
PM: Registered nosave memory: [mem 0xbdb30000-0xbde7afff]
PM: Registered nosave memory: [mem 0xbde7b000-0xbea40fff]
PM: Registered nosave memory: [mem 0xbea42000-0xbec47fff]
PM: Registered nosave memory: [mem 0xbf06e000-0xbf7eefff]
PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88043ec00000 s87000 r8192 d31784 u262144
pcpu-alloc: s87000 r8192 d31784 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4115645
Policy zone: Normal
log_buf_len individual max cpu contribution: 131072 bytes
log_buf_len total cpu_extra contributions: 655360 bytes
log_buf_len min size: 131072 bytes
log_buf_len: 1048576 bytes
early log buf free: 119824(91%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16379736K/16723984K available (4093K kernel code, 799K rwdata, 1748K rodata, 896K init, 700K bss, 344248K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=12 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
NR_IRQS:4352 nr_irqs:1016 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3999.803 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7999.60 BogoMIPS (lpj=3999803)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 12K (ffffffff81760000 - ffffffff81763000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5
x86: Booted up 1 node, 6 CPUs
smpboot: Total of 6 processors activated (47997.63 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbdb30000-0xbde7afff] (3452928 bytes)
PM: Registering ACPI NVS region [mem 0xbea42000-0xbec47fff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe901fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [1912:0015] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe801fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:04:05.0: [109e:036e] type 00 class 0x040000
pci 0000:04:05.0: reg 0x10: [mem 0xd0001000-0xd0001fff pref]
pci 0000:04:05.1: [109e:0878] type 00 class 0x048000
pci 0000:04:05.1: reg 0x10: [mem 0xd0000000-0xd0000fff pref]
pci 0000:04:06.0: [1033:00f2] type 00 class 0x0c0010
pci 0000:04:06.0: reg 0x10: [mem 0xfe700000-0xfe700fff]
pci 0000:04:06.0: supports D2
pci 0000:04:06.0: PME# supported from D2 D3hot
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd00fffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xfe604000-0xfe604fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xfe600000-0xfe603fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: bridge window [mem 0xfe600000-0xfe6fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd830000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbea42000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf06e000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0480-0x0481] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd00fffff pref]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 5612K (ffff8800374fa000 - ffff880037a75000)
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:09.0 to group 2
iommu: Adding device 0000:00:0a.0 to group 3
iommu: Adding device 0000:00:11.0 to group 4
iommu: Adding device 0000:00:12.0 to group 5
iommu: Adding device 0000:00:12.2 to group 5
iommu: Adding device 0000:00:13.0 to group 6
iommu: Adding device 0000:00:13.2 to group 6
iommu: Adding device 0000:00:14.0 to group 7
iommu: Adding device 0000:00:14.2 to group 8
iommu: Adding device 0000:00:14.3 to group 9
iommu: Adding device 0000:00:14.4 to group 10
iommu: Adding device 0000:00:14.5 to group 11
iommu: Adding device 0000:00:15.0 to group 12
iommu: Adding device 0000:00:16.0 to group 13
iommu: Adding device 0000:00:16.2 to group 13
iommu: Adding device 0000:01:00.0 to group 14
iommu: Adding device 0000:01:00.1 to group 14
iommu: Adding device 0000:02:00.0 to group 15
iommu: Adding device 0000:03:00.0 to group 16
iommu: Adding device 0000:04:05.0 to group 10
iommu: Adding device 0000:04:05.1 to group 10
iommu: Adding device 0000:04:06.0 to group 10
iommu: Adding device 0000:05:00.0 to group 12
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1456677038.955:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ashmem: initialized
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2016-02-28 16:30:39 UTC (1456677039)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 896K (ffffffff81680000 - ffffffff81760000)
systemd-udevd[83]: starting version 215
random: systemd-udevd urandom read with 5 bits of entropy available
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: INTEL SSDSA2CT040G3, 4PC10362, max UDMA/133
ata3.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: WDC WD5000AAKS-00E4A0, 05.01D05, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
ata4.00: configured for UDMA/133
ata5.00: ATA-8: MD06400-NSDW-RO, 51.0AB51, max UDMA/133
ata5.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata5.00: configured for UDMA/133
ata1.00: ATAPI: PIONEER DVD-RW DVR-220L, 1.01, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-220L 1.01 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2CT04 0362 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1D05 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA MD06400-NSDW-RO AB51 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.3 GiB)
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: Enabling discard_zeroes_data
sda: sda1 sda2
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sda] Attached SCSI disk
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
sdb: sdb2
sd 3:0:0:0: [sdb] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 4000.101 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a8bc621d3, max_idle_ns: 440795368084 ns
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
microcode: CPU0: new patch_level=0x06000832
microcode: CPU2: new patch_level=0x06000832
microcode: CPU4: new patch_level=0x06000832
random: nonblocking pool is initialized
PM: Starting manual resume from disk
PM: Hibernation image partition 8:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Found ordering cycle on basic.target/start
systemd[1]: Found dependency on sysinit.target/start
systemd[1]: Found dependency on portmap.service/start
systemd[1]: Found dependency on network-online.target/start
systemd[1]: Found dependency on NetworkManager-wait-online.service/start
systemd[1]: Found dependency on basic.target/start
systemd[1]: Breaking ordering cycle by deleting job portmap.service/start
systemd[1]: Job portmap.service/start deleted to break ordering cycle starting with basic.target/start
systemd[1]: Found ordering cycle on basic.target/start
systemd[1]: Found dependency on sysinit.target/start
systemd[1]: Found dependency on networking-routes.service/start
systemd[1]: Found dependency on network-online.target/start
systemd[1]: Found dependency on NetworkManager-wait-online.service/start
systemd[1]: Found dependency on basic.target/start
systemd[1]: Breaking ordering cycle by deleting job networking-routes.service/start
systemd[1]: Job networking-routes.service/start deleted to break ordering cycle starting with basic.target/start
fuse init (API version 7.23)
loop: module loaded
systemd-udevd[271]: starting version 215
ACPI: acpi_idle registered with cpuidle
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
wmi: Mapper loaded
acpi-cpufreq: overriding BIOS provided _PSD data
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90001b74b00). heartbeat=60 sec (nowayout=0)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
scsi 0:0:0:0: Attached scsi generic sg0 type 5
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: Attached scsi generic sg5 type 0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
clocksource: Switched to clocksource tsc
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.3 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.3 xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
[drm] Initialized drm 1.1.0 20060810
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.3 xhci-hcd
usb usb3: SerialNumber: 0000:02:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
media: Linux media interface: v0.10
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.3 ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90001b94000, d4:3d:7e:91:62:ba, XID 0c900800 IRQ 36
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
xhci_hcd 0000:03:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
Linux video capture interface: v2.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.3 xhci-hcd
usb usb5: SerialNumber: 0000:03:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.4.3 xhci-hcd
usb usb6: SerialNumber: 0000:03:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 4.4.3 ehci_hcd
usb usb7: SerialNumber: 0000:00:16.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
sr 1:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
sr 1:0:0:0: Attached scsi CD-ROM sr1
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
EDAC MC: Ver: 3.0.0
input: PC Speaker as /devices/platform/pcspkr/input/input4
MCE: In-kernel MCE decoding enabled.
[drm] radeon kernel modesetting enabled.
AMD64 EDAC driver v3.4.0
bttv: driver version 0.9.19 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1043:0x03DA).
[drm] register mmio base: 0xFEA20000
[drm] register mmio size: 131072
ATOM BIOS: 6779.13.12.0.41.AS08
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 8226104 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
firewire_ohci 0000:04:06.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x1
snd_bt87x 0000:04:05.1: bt87x0: Using board 1, analog, digital (rate 32000 Hz)
bttv: Bt8xx card found (0)
bttv: 0: Bt878 (rev 17) at 0000:04:05.0, irq: 20, latency: 32, mmio: 0xd0001000
bttv: 0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv: 0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv: 0: i2c: checking for MSP34xx @ 0x80... not found
bttv: 0: miro: id=9 tuner=3 radio=no stereo=no
bttv: 0: tuner type=3
[drm] Internal thermal controller without fan control
== power state 0 ==
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 950 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 950 vddci: 0
power level 2 sclk: 10000 mclk: 15000 vddc: 950 vddci: 0
status: c r b
== power state 1 ==
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 mclk: 60000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 60000 vddc: 900 vddci: 0
power level 2 sclk: 62500 mclk: 60000 vddc: 1000 vddci: 0
status:
== power state 2 ==
ui class: none
internal class: uvd
caps: video
uvd vclk: 70000 dclk: 56000
power level 0 sclk: 62500 mclk: 60000 vddc: 1000 vddci: 0
power level 1 sclk: 62500 mclk: 60000 vddc: 1000 vddci: 0
power level 2 sclk: 62500 mclk: 60000 vddc: 1000 vddci: 0
status:
[drm] radeon: dpm initialized
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.4.3 ohci_hcd
usb usb8: SerialNumber: 0000:00:12.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
bttv: 0: audio absent, no audio device found!
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88042af40c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88042af40c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90002032118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
All bytes are equal. It is not a TEA5767
tuner 2-0060: Tuner -1 found with type(s) Radio TV.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 7 usecs
tuner-simple 2-0060: creating new instance
tuner-simple 2-0060: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.4.3 ohci_hcd
usb usb9: SerialNumber: 0000:00:13.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
bttv: PLL set ok
bttv: 0: registered device video0
bttv: 0: registered device vbi0
Adding 2095100k swap on /dev/sda2. Priority:-1 extents:1 across:2095100k SS
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI PCI host controller
usb usb10: Manufacturer: Linux 4.4.3 ohci_hcd
usb usb10: SerialNumber: 0000:00:14.5
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
r8169 0000:05:00.0 eth1: renamed from eth0
systemd-udevd[325]: renamed network interface eth0 to eth1
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: OHCI PCI host controller
usb usb11: Manufacturer: Linux 4.4.3 ohci_hcd
usb usb11: SerialNumber: 0000:00:16.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
usb 1-2: new high-speed USB device number 2 using ehci-pci
EXT4-fs (sdc1): warning: mounting fs with errors, running e2fsck is recommended
usb 5-2: new full-speed USB device number 2 using xhci_hcd
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
usb 1-2: New USB device found, idVendor=04b8, idProduct=0880
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: EPSON Epson Stylus SX430 Series
usb 1-2: Manufacturer: EPSON
usb 1-2: SerialNumber: 4E4142593232383759
usb 9-2: new low-speed USB device number 2 using ohci-pci
usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0880
usbcore: registered new interface driver usblp
usb-storage 1-2:1.2: USB Mass Storage device detected
scsi host6: usb-storage 1-2:1.2
usbcore: registered new interface driver usb-storage
firewire_core 0000:04:06.0: created device fw0: GUID 0085044080001990, S400
usb 9-2: New USB device found, idVendor=04f3, idProduct=0103
usb 9-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2: New USB device found, idVendor=047f, idProduct=c00f
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Plantronics C320
usb 5-2: Manufacturer: Plantronics
usb 5-2: SerialNumber: 870ED6928145D744BAFA2C033D83C9A4
hidraw: raw HID events driver (C) Jiri Kosina
usb 9-3: new full-speed USB device number 3 using ohci-pci
usb 5-2: Warning! Unlikely big volume range (=8192), cval->res is probably wrong.
usb 5-2: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/8192/1
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 950 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 950 vddci: 0
power level 2 sclk: 10000 mclk: 15000 vddc: 950 vddci: 0
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 mclk: 60000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 60000 vddc: 900 vddci: 0
power level 2 sclk: 62500 mclk: 60000 vddc: 1000 vddci: 0
status: r
usbcore: registered new interface driver snd-usb-audio
usb 9-3: New USB device found, idVendor=046d, idProduct=c52f
usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-3: Product: USB Receiver
usb 9-3: Manufacturer: Logitech
[drm] fb mappable at 0xC0475000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
switching from power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 mclk: 60000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 60000 vddc: 900 vddci: 0
power level 2 sclk: 62500 mclk: 60000 vddc: 1000 vddci: 0
status: c r
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 mclk: 60000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 60000 vddc: 900 vddci: 0
power level 2 sclk: 62500 mclk: 60000 vddc: 1000 vddci: 0
status: c r
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card3/input14
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.0/0003:04F3:0103.0001/input/input15
hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:13.0-2/input0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.1/0003:04F3:0103.0002/input/input16
hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:13.0-2/input1
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.0/0003:046D:C52F.0003/input/input17
hid-generic 0003:046D:C52F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.1/0003:046D:C52F.0004/input/input18
input: Plantronics Plantronics C320 as /devices/pci0000:00/0000:00:0a.0/0000:03:00.0/usb5/5-2/5-2:1.3/0003:047F:C00F.0005/input/input19
hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input1
plantronics 0003:047F:C00F.0005: input,hiddev0,hidraw4: USB HID v1.00 Device [Plantronics Plantronics C320] on usb-0000:03:00.0-2/input3
scsi 6:0:0:0: Direct-Access EPSON Storage 1.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sde] Attached SCSI removable disk
systemd-journald[241]: Received request to flush runtime journal from PID 1
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
vboxdrv: Found 6 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 4000095595 Hz
vboxdrv: Successfully loaded version 5.0.14 (interface 0x00240000)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU found
r8169 0000:05:00.0 eth1: link down
r8169 0000:05:00.0 eth1: link down
usblp0: removed
usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0880
r8169 0000:05:00.0 eth1: link up
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
EXT4-fs (sdc1): error count since last fsck: 11
EXT4-fs (sdc1): initial error at time 1405346700: ext4_mb_generate_buddy:756
EXT4-fs (sdc1): last error at time 1405346819: ext4_put_super:792
usblp0: removed
usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0880
usblp0: removed
usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0880
usblp0: removed
usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0880
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
serial 00:03: disabled
sd 5:0:0:0: [sdd] Synchronizing SCSI cache
sd 5:0:0:0: [sdd] Stopping disk
sd 4:0:0:0: [sdc] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
sd 3:0:0:0: [sdb] Stopping disk
sd 4:0:0:0: [sdc] Stopping disk
PM: suspend of devices complete after 815.695 msecs
PM: late suspend of devices complete after 0.563 msecs
pcieport 0000:00:0a.0: System wakeup enabled by ACPI
pcieport 0000:00:09.0: System wakeup enabled by ACPI
pcieport 0000:00:15.0: System wakeup enabled by ACPI
ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 12.210 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
microcode: CPU0: new patch_level=0x06000832
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x11
TSC synchronization [CPU#0 -> CPU#1]:
Measured 2481556902 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x12
cache: parent cpu2 should not be sleeping
microcode: CPU2: new patch_level=0x06000832
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x13
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x14
cache: parent cpu4 should not be sleeping
microcode: CPU4: new patch_level=0x06000832
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x15
cache: parent cpu5 should not be sleeping
CPU5 is up
ACPI: Waking up from system sleep state S3
clocksource: Switched to clocksource hpet
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
pcieport 0000:00:09.0: System wakeup disabled by ACPI
ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
pcieport 0000:00:0a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 11.565 msecs
PM: early resume of devices complete after 0.470 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
bttv: 0: reset, reinitialize
usb usb5: root hub lost power or was reset
usb usb6: root hub lost power or was reset
bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
pcieport 0000:00:15.0: System wakeup disabled by ACPI
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88042af40c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88042af40c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90002032118
bttv: PLL set ok
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 6 usecs
serial 00:03: activated
rtc_cmos 00:04: System wakeup disabled by ACPI
r8169 0000:05:00.0 eth1: link down
sd 2:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
sd 4:0:0:0: [sdc] Starting disk
sd 5:0:0:0: [sdd] Starting disk
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
ata3.00: Enabling discard_zeroes_data
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
ata6.00: configured for UDMA/133
ata1.00: configured for UDMA/100
firewire_core 0000:04:06.0: rediscovered device fw0
[drm] ib test on ring 5 succeeded
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 950 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 950 vddci: 0
power level 2 sclk: 10000 mclk: 15000 vddc: 950 vddci: 0
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 mclk: 60000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 60000 vddc: 900 vddci: 0
power level 2 sclk: 62500 mclk: 60000 vddc: 1000 vddci: 0
status: r
PM: resume of devices complete after 986.027 msecs
PM: Finishing wakeup.
Restarting tasks ...
usb 5-2: USB disconnect, device number 2
done.
usb 5-2: new full-speed USB device number 3 using xhci_hcd
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169 0000:05:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
usb 5-2: New USB device found, idVendor=047f, idProduct=c00f
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Plantronics C320
usb 5-2: Manufacturer: Plantronics
usb 5-2: SerialNumber: 870ED6928145D744BAFA2C033D83C9A4
usb 5-2: Warning! Unlikely big volume range (=8192), cval->res is probably wrong.
usb 5-2: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/8192/1
r8169 0000:05:00.0 eth1: link down
input: Plantronics Plantronics C320 as /devices/pci0000:00/0000:00:0a.0/0000:03:00.0/usb5/5-2/5-2:1.3/0003:047F:C00F.0006/input/input23
plantronics 0003:047F:C00F.0006: input,hiddev0,hidraw4: USB HID v1.00 Device [Plantronics Plantronics C320] on usb-0000:03:00.0-2/input3
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
r8169 0000:05:00.0 eth1: link up
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: configured for UDMA/133